Modern Orbit Ring LED Chandelier with Remote — Black, 64cm, 40W Dimmable
Delivery & Returns
Two crossing rings, 64cm across, for a light that feels like it's in motion.
A 64cm black chandelier made of two crossing rings that look like orbits around a centre point. It's a wider, more open version of the classic ring pendant, suited to dining rooms, living rooms and bedrooms.
Bigger footprint, lighter look
At 64cm wide and 49cm tall, it fills more of the ceiling than a single ring without feeling heavy, because the rings are thin and open.
Light output
40W of integrated LED gives about 2,400 lumens, suited to rooms of around 15 to 20 square metres.
Warm to cool, soft to bright
The included remote moves the light anywhere from warm 3000K to cool 6500K, and dims it from 10% to full brightness. Warm light suits a relaxed dinner; cooler, brighter light suits cooking, homework or cleaning up.
Use a normal on/off switch
This light dims through its own remote, not the wall. It must be wired to a standard on/off switch; a wall dimmer or smart dimmer switch can make it flicker or buzz, or damage the driver.
Installation
It's a hardwired ceiling light, so in Australia it must be installed by a licensed electrician. The hanging cables adjust up to 140cm, so it can sit low over a table or island or higher in a room with a tall ceiling. Mounting hardware and instructions are included.
A closer look
Specifications
| Colour | Black |
|---|---|
| Size | 64cm W × 49cm H |
| Ceiling canopy | 18cm × 4cm |
| Power | 40W integrated LED |
| Brightness | Approx. 2,400 lumens |
| Colour temperature | 3000K–6500K, adjustable |
| Dimming | 10–100% via remote |
| Hanging cable | Adjustable up to 140cm |
| Materials | Iron, silicone strip diffuser |
| Switch | Standard on/off wall switch only |
| Included | Light, remote, mounting hardware, instructions |
Delivery and returns
Free shipping Australia-wide — already in the price, with nothing added at checkout.
Tracked delivery, with the tracking number emailed to you as soon as it ships.
30-day returns. If it arrives faulty or damaged we cover the return freight and put it right.
Questions people ask
Can I install it myself?
No. It's a hardwired fitting, and in Australia that work has to be done by a licensed electrician.
Will it work with my dimmer switch?
No. Wire it to a standard on/off switch and use the included remote to dim it and change the colour of the light. A wall dimmer can cause flickering or damage.
Can I replace the globes?
No. The LEDs are built into the light, so there are no globes to buy or change.
What voltage is it?
The maker rates it at 220V. Your electrician will confirm it suits your home's supply when they install it.
How high will it hang?
The cables adjust up to 140cm, and spare length is stored in the 18cm ceiling canopy.