Modern Wave LED Linear Pendant Light with Remote — White, 100cm, 28W Dimmable
Delivery & Returns
The twisting wave pendant in clean white, for bright, minimal kitchens and dining rooms.
This 100cm linear pendant is two twisting bands of white with a glowing inner edge, on a white ceiling plate. Against a white ceiling it almost floats, leaving just a ribbon of light above the table.
White on white
The white finish suits minimalist, coastal and Hamptons-style interiors, where it reads as part of the ceiling rather than an object hanging from it.
Light output
28W of integrated LED gives about 1,680 lumens along the length of a dining table or island.
Warm to cool, soft to bright
The included remote moves the light anywhere from warm 3000K to cool 6000K, and dims it from 10% to full brightness. Warm light suits a relaxed dinner; cooler, brighter light suits cooking, homework or cleaning up.
Use a normal on/off switch
This light dims through its own remote, not the wall. It must be wired to a standard on/off switch; a wall dimmer or smart dimmer switch can make it flicker or buzz, or damage the driver.
Installation
It's a hardwired ceiling light, so in Australia it must be installed by a licensed electrician. The hanging cables adjust up to 120cm, so it can sit low over a table or island or higher in a room with a tall ceiling. Mounting hardware and instructions are included.
A closer look
Specifications
| Colour | White |
|---|---|
| Length | 100cm |
| Body | 100 × 14 × 14cm |
| Ceiling plate | 20 × 12cm |
| Power | 28W integrated LED |
| Brightness | Approx. 1,680 lumens |
| Colour temperature | 3000K–6000K, adjustable |
| Dimming | Via remote |
| Hanging height | Adjustable up to 120cm |
| Materials | Aluminium, acrylic |
| Voltage | 220V (maker's rating) |
| Switch | Standard on/off wall switch only |
| Included | Light, remote, mounting hardware, instructions |
Delivery and returns
Free shipping Australia-wide — already in the price, with nothing added at checkout.
Tracked delivery, with the tracking number emailed to you as soon as it ships.
30-day returns. If it arrives faulty or damaged we cover the return freight and put it right.
Questions people ask
Can I install it myself?
No. It's a hardwired fitting, and in Australia that work has to be done by a licensed electrician.
Will it work with my dimmer switch?
No. Wire it to a standard on/off switch and use the included remote to dim it and change the colour of the light. A wall dimmer can cause flickering or damage.
Can I replace the globes?
No. The LEDs are built into the light, so there are no globes to buy or change.
What voltage is it?
The maker rates it at 220V. Your electrician will confirm it suits your home's supply when they install it.
How high will it hang?
The suspension adjusts up to 120cm from the ceiling plate.