Twin Spiral LED Pendant Light with Remote — Gold, 94cm, 53W Dimmable
Delivery & Returns
The twin spiral pendant in a warm gold finish, sized for a dining table or island.
Two gold bars spiral around each other in a 94cm sweep, each lined with a glowing LED strip, hanging from a matching gold canopy. It reads as a piece of sculpture above the table, on or off.
Sculptural gold
The gold finish suits warm timber, cream and stone interiors. At 94cm long and 22cm deep, it's best over a table about 125 to 180cm long.
Light output
53W of integrated LED gives about 3,180 lumens.
Warm to cool, soft to bright
The included remote moves the light anywhere from warm 3000K to cool 6500K, and dims it from 10% to full brightness. Warm light suits a relaxed dinner; cooler, brighter light suits cooking, homework or cleaning up.
Use a normal on/off switch
This light dims through its own remote, not the wall. It must be wired to a standard on/off switch; a wall dimmer or smart dimmer switch can make it flicker or buzz, or damage the driver.
Installation
It's a hardwired ceiling light, so in Australia it must be installed by a licensed electrician. The hanging cables adjust up to 180cm, so it can sit low over a table or island or higher in a room with a tall ceiling. Mounting hardware and instructions are included.
A closer look
Specifications
| Colour | Gold |
|---|---|
| Size | 94cm L × 22cm W × 22cm H |
| Ceiling canopy | 21cm × 5cm |
| Power | 53W integrated LED |
| Brightness | Approx. 3,180 lumens |
| Colour temperature | 3000K–6500K, adjustable |
| Dimming | 10–100% via remote |
| Hanging wire | Adjustable up to 180cm |
| Materials | Aluminium, silicone |
| Voltage | 220V (maker's rating) |
| Switch | Standard on/off wall switch only |
| Included | Light, remote, mounting hardware, instructions |
Delivery and returns
Free shipping Australia-wide — already in the price, with nothing added at checkout.
Tracked delivery, with the tracking number emailed to you as soon as it ships.
30-day returns. If it arrives faulty or damaged we cover the return freight and put it right.
Questions people ask
Can I install it myself?
No. It's a hardwired fitting, and in Australia that work has to be done by a licensed electrician.
Will it work with my dimmer switch?
No. Wire it to a standard on/off switch and use the included remote to dim it and change the colour of the light. A wall dimmer can cause flickering or damage.
Can I replace the globes?
No. The LEDs are built into the light, so there are no globes to buy or change.
What voltage is it?
The maker rates it at 220V. Your electrician will confirm it suits your home's supply when they install it.
How high will it hang?
The wires adjust up to 180cm, useful for high or raked ceilings.